Multi Fiber Cables

Pre-terminated multi fiber cables are ready for quick assembly to meet your most pressing needs. Fiber connections combine relay cables with any combination of multimode-fiber and single mode-fiber connectors, connectors include SC, ST, LC, FC, E-2000, MPO, MTP. Fiber strands from 4 fiber, 6,8,12,24,36,48,96,144 fiber cores. Completed assembly saves time and cost on the installation site. Custom labels can be used to make installation clearer and simpler. Once completed and tested, each component is rolled around on to a transport reel for quick and easy installation. A reinforced pull ring, available as an option, provides connector protection and is easy to install. Excellent consistent craftsmanship installed almost instantaneously. The highly configurable multi-fiber pre-terminated cable assemblies are the highest engineered performance and well-crafted quality assurance.

Multi Fiber Cables Benefit

Huihongfiber offers multi-core cable assemblies – end-up for a variety of connector types of indoor and outdoor cables. These cable assemblies can be used as pre-terminated trunks with connectors at both ends, or as a part of the transition from outdoor cables to indoor cables for stitching. 4-144 fibers, aramid yarn enhanced, provides rugged protection, high flexibility, easy wiring, and provides rizer, flame retardant and low-smoke halogen-free cables. Pre-installed pull ring kit available on some products, 1m standard tap (other lengths are custom, 900 micron tightly buffered fiber allows direct termination; 2.0mm breakout cables reaches or exceeds EIA/TIA 568-A/GR-409-core telcordia®GR-326 connectors. Single mode/Multimode MPO/MTP Trunk cables, Custom cable assemblies, OM1, OM2, OM3, OM4, OM5, OS2. UPC polished and APC polished connectors, armored, non-armored cable assemblies.

Multi Fiber Cables Types

Multi-fiber armored cables provide durability and flexibility, making it a unique network solution with 4 to 12 separate fiber units. Each fiber has a spiral stainless-steel belt, wrapped around a buffer fiber surrounded by a coated aramid and stainless-steel mesh. It is specifically designed for customer premises, central offices, and indoor harsh environments or busy traffic areas that require additional protection. Indoor multi-fiber branch cables are low-cost, pre-assembled cables that are primarily used for transmission equipment and wiring boards or similar fixed lines. The fiber optic cable meets the EIA/TIA 604-2 of high-speed cable networks. Pre-terminated indoor/outdoor fiber optic cable components are designed to support today’s data needs while meeting the evolving network needs of the future. It is ideal to connect the two buildings to the network by using underground pipes and are also installed in the entrance facility.

High-density Multi Fiber Cables from Professional China Manufacturer

Huihong Technologies is manufacturer of custom multi fiber cable assemblies, including armored, non-armored, indoor, outdoor, indoor/outdoor, types, high-density multi fiber cable assembly are mainly made up of MTP/MPO connectors (also MTP/MPO-LC/SC/FC) and fiber optic cables, also known as MTP/MPO fiber jumpers, which comply with international standards IEC-61754-7, THE United States TIA-604-5 (FOCIS5) and other standards, Compatible with VZ TPR.9431, IEC-61754-7 and EIA/TIA-604-5, up to 500 plugs. High-density multi fiber cable assembly offer the advantages of high density and high precision to meet the needs of 40G/100G high-density multi-core data centers.

High-density multi fiber cable assembly can be divided into 8 cores, 12 cores, 24 cores, 48 cores, 72 cores and 144 cores depending on the number of fiber cores. High-density multi fiber cable assembly can be divided into single-mode and multi-mode high-density multi fiber cable assembly depending on the type of fiber. Single-mode high-density multi fiber cable assembly are generally yellow for long-distance transmission, while multi-mode high-density multi fiber cable assembly are generally water blue or rose red for short-distance transmission. High-density multi fiber cable assembly can be divided into trunk fiber jumpers and branch fiber jumpers depending on whether the fiber has branches. The trunk fiber jumper is the MTP connector at both ends, the cable diameter is generally 3.0mm, with low insertion and reflection loss, the branch fiber jumper is the one end with MTP connector, the other end uses LC, SC and other different types of connectors (LC connectors are the most common), Its branch cable diameter is generally 2.0/0.9mm, due to the branch fiber jumper number is more, can be widely used in high-density multi-core wiring environment.

High-density multi fiber cable assembly can be used in high-density multi-core cabling environments such as local area networks, wide area networks, backbone networks, large data center rooms, communication base stations (such as telecommunications networks), cable TV, fiber optic communication systems, building-intensive cabling systems (such as cell, industrial park, etc.), fiber optic wiring, etc.